Skip to content
MINIMAX AIRCRAFT TUG, LLC
Toggle mobile menu
Minimax Aircraft Tugs
Save $50 on any purchase over $1200. Use coupon code
BEECHCRAFT- SIERRA, MUSKETEER
BOSS TAIL DRAGGER
CESSNA 150,152,172,177 WHEEL PANTS
CESSNA 162 SKYCATCHER
CESSNA 172RG, 177RG, 182RG
CESSNA 182, 206 WHEEL PANTS
DIAMOND DA40, DA50
FLIGHT DESIGN CTLS
PIPER PA24, PA30 COMANCHE
PIPER, MAULE- nwp TRICYCLE GEAR
PIPER- WHEEL PANTS
ROCKWELL COMMANDER 112-114
SOCATA TB20, TB21
VANS RV 6A,7A,8A,9A,12
VANS RV10, 14A
PARTS and ACCESSORIES
"The Boss" Tail-Dragger Assembly Instructions
Beechcraft Assembly Instructions
Beechcraft Sierra, Musketeer Assembly Instructions
Cessna (wheel pants) Assembly Instructions
Cessna, Navion (no wheel pants) Assembly Instructions
Dewalt 20v Drill Operation, Troubleshooting
Fork Adjustment Instructions
Fork Type Assembly Instructions
Gear Box Lubrication
Handle Extension Assembly Instructions
Lake Aircraft Tug Assembly Instructions
Lancair ES Assembly Instructions
Lancair IV, Glasair Assembly Instructions
Milwauke 28v Cordless Drill Assembly
Milwaukee Tool and Battery Warranty
Minimax HD Taildragger Assembly Instructions
Minimax Tail-Dragger Assembly Instructions
Mooney Assembly Instuctions
Nanchang CJ-6 Tug Assembly Instructions
Performance Check List
Piper (wheel pants) Assembly Instructions
Piper Comanche Tug Assembly Instructions
Piper, Maule (no wheel pants) Assembly Instructions
Q&A- Owner produced aircraft parts
Robinson Helicopter Tow Assembly Instructions
Robinson jack plastic insert removal
Rockwell Commander 112, 114 Assembly Instructions
Socata TB20-21 Aircraft Tug Assembly Instructions
Speedy Mover Assembly Instructions
Tail-Dragger Assembly Instructions
Traction Tape Installation
Use and Care Guide
Weight Hub Installation Instructions
Yak 52, 52W Assembly Instructions
A Bombing Mission
Nav Menu 2
Nav Menu 3
Nav Menu 4
Nav Menu 5
Nav Menu 6
Nav Menu 7
Nav Menu 8
Cessna 150,152,172,177 Tug (wheel-pants)
HOVER MOUSE OVER SMALL IMAGES FOR LARGER VIEW.
CLICK ANY IMAGE FOR SLIDESHOW
Cessna 150, 152, 172, 177 Tug (wheel-pants)
Highest quality, lowest price- Guaranteed!
List Price: $1,559.95
Usually Ships in 1 to 2 Weeks
[Add $79.95]. Spare Dewalt 3mah 20v battery
[Add $164.95]. Spare 28v Milwaukee battery.
[Add $189.95]. Milwaukee 28v Cordless Power System. Replaces Dewalt 20v power system. With tug purchase only.
[Add $8.95]. Spare T-Bolt clamp for handle receiver or drill handle tube.
[Add $39.95]. 24" handle extension provides greater leverage securing forks onto aircraft while standing.
[Add $79.95]. Provides a manual method of transporting tug without using battery.
[Add $89.95]. Wheel weight hubs for installation of 2- 25 lb. cast iron weights. Weights NOT included.
[Add $69.95]. Replaces stock tires. With purchase of new tug only. For snow and hard turf.
[Add $74.95]. One pair case hardened snow chains. Easy to install. Chains DO NOT fit snow tires.
Cessna Side Hubs:
[Add $48.00]. Hubs for fairing side clearance. Comes with wider opening forks if selected.
[Add $28.00]. For gaining initial traction on smooth concrete or epoxy painted floors.
300 watt Voltage Inverter:
[Add $54.95]. For use in converting 220v to 120v power and vice-versa.
Milwaukee 28v power system must be purchased as an option.
If you have a smooth concrete, or epoxy painted hangar floor, we recommend buying our
Wheel Weight Hubs
option to prevent tire slippage.
If purchasing wheel weight hubs, click
to purchase 2-25lb. CAP cast iron weights.
These are the ONLY weights which fit our weight hubs.
Some tow pins are located very close to the nose gear fairing. Attach your hand tow bar to tow pins letting it rest atop the fairing. Viewing from the side, note if tow bar handle is above or below a visual level line from tow pins. If level or above, you will need the Knots-2U option. If below level, you're good with stock forks.
IF YOU LIKE TO OVER-TIGHTEN BOLTS, BUY A SPARE T-BOLT CLAMP. THEY ARE NOT WARRANTIED AGAINST BREAKAGE.
Minimax tug towing C172 with wheel pants
Fork locking mechanism action
Please check the width of your nose gear yoke at the point your hand tow bar attaches. If it is over 2.5" wide you MUST advise in the comments box at checkout the actual width.
All steel, alloy construction
Trouble free design
Powder coated paint for durability
Simple Knock-Down design for easy transport
Maintenance-free oil bath gear box
3-speed transmission (Dewalt only)
Built-in light (Dewalt only)
Torque output 1150 inch lbs.
Made in the USA
Van's RV6A, 7A, 8A, 9A, 12
Robinson Helicopter R22, R44, R66
Minimax HD Tail Dragger
Beechcraft Sierra, Musketeer
PLEASE CLICK HERE TO WRITE A REVIEW »
0 of 0 people found the following review helpful:
May 9, 2013
Reviewer: Klaus from Deutschland
I buy the plug in power supply extra with 20v drill supply. The plug in power is amazing. It push plane very easy into hangar with incline and little bump. 20v is good for travel and level.
Was this review helpful to you?