Home > TAIL-DRAGGERS >

Tail Dragger
Tail Dragger aircraft tug
HOVER MOUSE OVER SMALL IMAGES FOR LARGER VIEW.
  
CLICK ANY IMAGE FOR SLIDESHOW
Taildragger Tug
Highest quality, lowest price- Guaranteed!
List Price: $1,899.95
Our Price: $1,799.95
Savings: $100.00

Price with Selected Options: $1,799.95


Availability: Usually Ships in 1 to 2 Weeks
Product Code: 021TAILDRAGGER


Extra 20v Battery: 		[Add $49.95]EXTRA Dewalt 20V battery

48" Handle: 		[Add $119.95]. 48" handle tube makes for easier towing and control. Ships separately and replaces the stock 30" handle tube. With purchase of new tug only.

Extended Warranty: 		[Add $49.95]Provides an additional year of warranty. -- Click Here to View Warranty

Wheel Weight Hubs: 		[Add $89.95]. Wheel weight hubs for installation of 2- 25 lb. cast iron weights. Weights NOT included. CLICK HERE TO PURCHASE THE WEIGHTS THAT FIT OUR HUBS

Snow tires: 		[Add $119.95]. Replaces stock tires. With purchase of new tug only. For snow and hard turf.

Tbolt: 		[Add $13.95]Spare T-Bolt clamp for handle receiver or drill handle tube.

Chains: 		[Add $129.95]. One pair case hardened snow chains. Easy to install. Chains DO NOT fit snow tires.

Traction tape: 		[Add $28.00]. For gaining initial traction on smooth concrete or epoxy painted floors.

Personalized N-Number Labeling: 		[Add $34.95]Personalize your Minimax Tug with your N-Number on the handle tube. -- Click Here for photo

Enter N-Number: 		Only enter if you are purchasing "Personalized N-number labeling".

Qty:  
DESCRIPTION TECHNICAL INFORMATION ASSEMBLY INSTRUCTIONS
 
This tug is suited for lightweight taildraggers such as a Cub, Champ, Luscombe, or lightweight experimental/LSA.
This tug ships with a 20V Dewalt power system.

Maximum static load 125 lbs.
For tail weights exceeding 90 lbs. the 48" handle product option is required.
If your tail weight exceeds 125 lbs. check out tug

If you have a smooth concrete or epoxy painted hangar floor, we recommend buying our Traction Tape or Wheel Weight Hubs option to prevent tire slippage.

If you are purchasing Wheel Weight Hubs you must click HERE to purchase 2 - 25 lb. cast iron weights.
The wheel weight hubs are only the hubs and do not come with the weights themselves. The weights ship for free from the vendor in the link.
NOTE: These are the ONLY weights which fit our weight hubs
Minimax Taildragger Tug
Features
Will accept tail wheels as small as 4" diameter
For use on aircraft with 110 lb or less tail weight
Powerful
All steel, alloy construction
Trouble free design
Powder coated paint for durability
Simple Knock-Down design for easy transport
Automatic brake
Built-in rheostat
Built-in light (Dewalt only)
Three speed power unit (Dewalt only)
Weight 53 lbs (24 kgs)
Worm gear drive for efficient power transfer
Maintenance-free oil bath gear box
Torque output 1150 inch lbs.
Made in the USA

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 13
PLEASE CLICK HERE TO WRITE A REVIEW »

  0 of 0 people found the following review helpful:
 
5 of 5 Tail dragget August 20, 2025
Reviewer: Jim Haunstein from Marysville, PA United States  
Please email me the receipt for this purchase
The unit works well

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Must Have Aviation Device June 19, 2025
Reviewer: Tad Derouin from Henniker, NH United States  
My Luscombe was getting heavier and tasking to move in and out of my hanger with my original tail dragger unit. This Mini Max makes plane feel as it did 42 years ago , my flying will be increased this year knowing my Minimax makes effortless aircraft movements. Safety is enhanced with zero risk of muscle strain while using my Minimax. Thank you for this wonderful and affordable aircraft tug.

Respectfully submitted,

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
3 of 5 Tail wheel tug June 1, 2024
Reviewer: Chad Perkins from Ida, MI United States  
It will definitely move the airplane, front boards and backwards in a straight line, I think my Airplane, which is a MX seven is probably a little too heavy because with the straight handle is very awkward to hold the tail up in the air. The drill keeps coming loose from the driveshaft inside the unit constantly, and I have to make a turn in my hanger in this machine will not do that because it has both wheels that drive, I will probably get a different gearbox and with a single output I think that’ll allow it to turn. I am probably also going to change the handle and put a universal joint in it so I can have a little bit of a bend so it’s not so awkward .

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Awesome January 24, 2024
Reviewer: 907herb from Eagle River, AK United States  
I was having trouble getting my cub back in the hanger after it started snowing.  Bought the tug and now it is not a problem. I have the longer handle and regular tires.  Just wonderful.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 owner/operator October 10, 2023
Reviewer: David Dudley from Tavares, FL United States  
went together well. Works just great.

Was this review helpful to you?

View All Customer Reviews